The bare minimum for this is typically a set of hacky kernel patches targeting a giver kernel version. SoC vendors’ main focus is to make the chip and give it enough BSP support for customers to buy it and build their products around it. Replacing the existing hard disk with a fast SSD is the easiest way.This is a common story in ARM / embedded linux. Instructions: Replacing hard disk with SSD Corresponding bracelets are already available for a few Euros (e.g. ![]() The bracelet is striped over the arm and has a cable with a crocodile clip, which is simply clamped to the radiator. This protects against electrostatic charge and prevents possible damage to the Mac Mini. TEKTON Precision Bit and Driver Kit, 27-Pieceīasically, it is recommended to wear an antistatic wrist strap when working within reach of electronic components.TR6 SafetyTorx and plastic-spudger, ready. I bought the following linked mini screwdriver set. towel) with the top facing down.įor the upgrade, suitable Torx screwdrivers and an Logic Board Removal Tool are required. Before that, however, we shut down the Mac mini, unplug the power plug and other cables and place the Mac Mini on a soft surface (e.g. Once all the backups have been completed, we can proceed with the next step. In the last step, the data and settings are now restored from the TimeMachine backup.Just follow the instructions on the screen. After that OS X can be installed on the new SSD. Before reinstalling, format the SSD using the disk utility (as “ Mac OS Extendet Journaled“).You will now be asked from which medium to boot.Then, press and hold the ALT key to turn on the Mac Mini. After the SSD is installed, plug in the USB stick.Now the new SSD must be installed in the Mac Mini (see installation for instructions). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |